LAP3 ECU Tune for Genesis G70 3.3T-GDI 

Applicable Models:
2019-2022 Genesis G70 3.3T-GDI 
2022-2026 Genesis G70 3.3T-GDI
*If your vehicle is from a different country outside of the U.S. & Canada, please make sure to contact us before purchasing the Tune*

Features:
- Increased Boost
- Increased Ignition Timing
- Adjusted Cam Timing
- Adjusted AFR & Target Lambda
- Unlocked Various Torque Management System
- Unlocked Top Speed Governor
- Race Throttle Mapping 
- Adjusted Wastegate Duty Cycle- Built-in Over-Boost Protection
- Disabled Catylatic Converter Efficiency Codes for HFC/Catless Exhaust Systems
- Optional Stage 1 Launch Control & Anti-Lag Tuning - Builds up to 8psi during the launch sequence & driving
- Optional Ghost Cam VVT Tuning -  Creates aggressive lopey idle 
- Optional Exhaust Tuning - Activates at 2500RPM+ during decel & off throttle.
- Optional Cold Start Disable Tuning - Reduces the Cold Start RPM to 1000 for quieter & smoother start-up operation, and reduces the engine component wear caused by the standard cold start sequence. 

Stock Baseline (365BHP):  310-330RWHP @ 14psi peak on dynojet
LAP3 Stage 1.0 ECU Tune: 380-460RWHP (Min 91+ Octane Required) - OEM primary downpipes required for 91
LAP3 Stage 1.5 ECU Tune: 410-480RWHP (Min 93+ Octane required)
LAP3 Stage 2.0 ECU Tune: 430-500RWHP (Min 95+ Octane/91+Meth required)
LAP3 Stage 2.5 ECU Tune: 460-530RWHP (Min 98+ Octane/93+Meth required) 

Hybrid Turbo Tuning Options:
LAP3 Stage 3.0 ECU Tune: 450-550RWHP (Min 93+ Octane required unless requested for 91+) 
LAP3 Stage 3.5 ECU Tune: 500-650RWHP (Min 98+ Octane/93+Meth Required)

Hybrid Turbo & Big Turbo Tuning Options (Equipped with aftermarket wastegates)
LAP3 Stage X ECU Tune: 450-1000RWHP (Utilizes aftermarket Boost Controllers. The user will be able to run various different octane & appropriate boost level. The power output will depend on the engine build, turbo's capability, as well as the fueling & octane of your choice.
 
Requirements for all ECU Tunes :
-  HKS M45IL plugs (gap spec 0.026-0.028")

Requirements for the Flame Tune:
- A Full Catless Exhaust system

Requirements for Stage 2 & 2.5 : 
- Race Fuel Mix above 95+ Octane or Water Meth Injection System

Requirements for Stage 2.5 :
- Water Meth Injection System with a 600-750cc nozzle with a minimum of 80% to 100% M1 Methanol content. If you currently have a Pro-Tuner, and want to get prepared for the Stage 2.5, you can get the V2 Pro-Tuner Meth Injection System

Recommended:
- Synthetic 5w40 or 0w40 oil every 3-4k miles
- ARP CA625+ Studs & Block Thread Reinforcement Kit for ~500WHP and up

*Boost may vary by a few psi, depends on the exhaust set up & wastegate voltage.*
Numbers may vary depend on the vehicle condition, fuel quality, bolt-ons, weather, and etc. 

Your Genesis Connect and UVO service will be offline while running the ECU Tune. If you'd like to keep the Bluelink/Kia Connect service, please provide your VIN# through the note at the checkout.

The typical lead time for the spare ECU & TCU Tune orders is 3-4weeks.

Disclaimer: All sales are final. Any risks associated with running a tune on a vehicle are solely that of the vehicle owner, and LAP3USA LLC is not liable for loss of warranty or damage incurred to your vehicle.