LAP3 Pro-Tuner V2.5 - Dynamic ECU Tuning Solution
2018+ CK Stinger 3.3T
2019+ Genesis G70 3.3T
Link to the Installation Guide
- Boost Mapping: Unlike most boost chips on the market, it doesn't just fool the sensor & voltage to increase boost. LAP3 Pro-Tuner precisely maps the boost pressure per RPM based on the engine load. The level of boost mapping per RPM is superior over any chips and ECU tunes on the market.
- Fueling Mapping: After carefully analyzing the fuel rail sensor & lambda values, we customize fueling map per RPM & engine load to increase gas mileage and performance.
- Ignition Timing Tuning for ISG Equipped Vehicles - Based on the crank angle sensor values and the boost pressure/rpm, Ignition Timing is mapped for the most optimal performance setup.
- Integrated IAT Bias Control - Further controlling timing logic is now possible, and you can choose to turn it on or off from the user setting.
- Top Speed Governor Removal(Optional): Pro-Tuner will allow you to unlock the top speed limiter (must be hardwired)
- End-User Tuning - You can map your own Boost, Fueling, Meth duty cycle per RPM through the Pro-Tuner V2.5 app.
- PROSS - LAP3 Android OS & Apple iOS app - Connects to the Pro-Tuner V2.5 via bluetooth and allows you to monitor Live Data for your engine condition
- Data Logging Capability - The Pro-Tuner V2.5 app offers data logging over 40 sensors.
- DTC Code Canceler - The owner can scan & select DTC codes to remove them.
- Available LAP3 Meth Injection System Support - We are working on a meth Injection system to interlock with our phone application. Custom tune ignition timing based on the engine load received from the Canbus, when paired with the Methanol Injection system via PWM controller system.
LAP3 Pro-Tuner V2.5 - 3.3T-GDI (Stinger & G70)
$1,200.00 Regular Price
Does your vehicle have ISG system?
- HKS M45IL Spark Plugs
V2 Pro-Tuner Mappings
- Mode 1 - Stock Map
- Mode 2 - 93+ Octane Mapping
- Mode 3 - 95+ Octane Mapping (E85 mix or Race Fuel mix recommended)
- Meth Mode - Meth Mapping (80% WMI with a ~500mm Nozzle. Injection Start between 5-10psi & Max Spray @ 15-20psi)
- User Mode - 91 Octane Mapping, which can be customized by the user
Click to see the Installation Guide